WebThis application guide must be read in-conjunction with the relevant specification, technical data sheet (TDS) and safety data sheet (SDS). Contractors selected by the client for the application should be made familiar with the procedures required and be able to demonstrate competence to the client’s satisfaction. HEALTH AND SAFETY WebDURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated speci fi cally for immersion and atmospheric service in marine and industrial …
Dura-Plate 235 Multi-Purpose Epoxy Sherwin Williams
WebDura-Plate® 235 Multi-Purpose Epoxy is a modified epoxy phenalkamine, formulated specifically for immersion and atmospheric service in marine and industrial environments. Dura- Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F. WebSaf ety Data Sheet (SDS) Marine Industrial Paint Co., Inc. Duraplate 289 Series Commercial Floor Coating SDS Number: 491 Revision Date: 11/24/2015 Store at temperatures between 10.0 °C (S0.0 °F) and S0.0 °C (120.0 °F) Page 5 of 9 Store away from strong acids, strong bases, strong oxidizing agents, strong reducing agents, flowers for new baby
SAFETY DATA SHEET
WebHigh flash point at >200°F (93°C) Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) NSF approved to Standard 61 for potable water (tanks of 1000 gallons or greater and pipes of 40" diameter or greater.) Brand Dura-Plate® Industry Water and Wastewater Oil and Gas Food and Beverage Marine Technology Solvent Liquid Coatings WebDura-Plate 235 NSF @ 5.0 mils dft/ct Abrasion Resistance: Method: ASTM D4060, CS17 wheel, 1000 cycles, 1 kg load Result: 65 mg loss Adhesion: Method: ASTM D4541 Result: 850 psi Direct Impact Resistance: Method: ASTM D2794 Result: 10 in lb Dry Heat Resistance: Method: ASTM D2485 Result: 250°F Moisture Condensation Resistance: WebD-289 incorporates a chemical curing mechanism that achieves fast initial water resistance and curing, and continues to harden and cure for 7-10 days after application to give a harder, tougher finish and more marking resistance than conventional water-based coatings and even most solvent-based sealers. Download Product Sheet green bars vs yellow bars